This gas cap holder gives your fuel cap a proper place to sit instead of hanging and scratching your paint, on the Mitsubishi Lancer Evolution 7, 8, and 9 (CT9A). It's a 3D-printed ASA holder that sits right on your fuel door with an OEM-like look and fit — and unlike stick-on holders, it mounts with a built-in bracket and needs no double-sided tape at all.
This is the new and improved model: stronger, longer-lasting, and with a cleaner engraved font. Printed in ASA for heat and UV durability, it can be custom engraved with almost any text or design, so you can make it your own while keeping that factory-clean look. Tuned to sit flush in the fuel door, it won't wiggle loose, break, or interfere with your OEM gas cap. Designed and 3D printed in-house in Los Angeles.
Installation is tool-free and takes seconds: slide the top into the overarching bracket, press on the bottom edge, and slide it down — no tape required. One important note: this is a 3D-printed piece, not metal, so handle it gently. Ease the top up, guide the holder toward the gas door, then slide it down — forcing it or installing it incorrectly can crack it. Give it a little care on install and it'll last.
Details
Fits: Mitsubishi Lancer Evolution 7, 8, 9 (CT9A, 2001–2007)
Fixes: a gas cap that hangs loose and scratches your paint
Mounts: built-in bracket, sits on the fuel door — no double-sided tape, no drilling
Custom: engrave almost any text or design
Material: ASA — stronger, longer-lasting, heat- and UV-resistant
Fit: OEM-like; won't wiggle loose or affect the OEM gas cap
Install: tool-free; handle gently — 3D-printed plastic, not metal
Give your gas cap a clean, OEM-style home — and put your own name or design on it. Clip it in, no tape, no drilling.
This gas cap holder gives your fuel cap a proper place to sit instead of hanging and scratching your paint, on the Mitsubishi Lancer Evolution 7, 8, and 9 (CT9A). It's a 3D-printed ASA holder that sits right on your fuel door with an OEM-like look and fit — and unlike stick-on holders, it mounts with a built-in bracket and needs no double-sided tape at all.
This is the new and improved model: stronger, longer-lasting, and with a cleaner engraved font. Printed in ASA for heat and UV durability, it can be custom engraved with almost any text or design, so you can make it your own while keeping that factory-clean look. Tuned to sit flush in the fuel door, it won't wiggle loose, break, or interfere with your OEM gas cap. Designed and 3D printed in-house in Los Angeles.
Installation is tool-free and takes seconds: slide the top into the overarching bracket, press on the bottom edge, and slide it down — no tape required. One important note: this is a 3D-printed piece, not metal, so handle it gently. Ease the top up, guide the holder toward the gas door, then slide it down — forcing it or installing it incorrectly can crack it. Give it a little care on install and it'll last.
Details
Fits: Mitsubishi Lancer Evolution 7, 8, 9 (CT9A, 2001–2007)
Fixes: a gas cap that hangs loose and scratches your paint
Mounts: built-in bracket, sits on the fuel door — no double-sided tape, no drilling
Custom: engrave almost any text or design
Material: ASA — stronger, longer-lasting, heat- and UV-resistant
Fit: OEM-like; won't wiggle loose or affect the OEM gas cap
Install: tool-free; handle gently — 3D-printed plastic, not metal
Give your gas cap a clean, OEM-style home — and put your own name or design on it. Clip it in, no tape, no drilling.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5